Address
304 North Cardinal
St. Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
HV430FHB-F90 42.5″ FHD LVDS Open Cell for industrial display
HV430FHB-F90 is a 43-inch FHD 1920×1080 TFT-LCD open cell with a 2-port mini-LVDS interface, listed in the Vernon display sourcing catalogue. Request the current specification, sourcing support and technical evaluation before design-in or quotation.
43 Inch FHD TFT-LCD Open Cell
HV430FHB-F90 is a 43 inch class FHD 1920×1080 TFT-LCD open cell with a 2-port mini-LVDS interface, listed in the Vernon display sourcing catalogue. The values on this page come from the currently registered specification for this model; request the current specification before design-in or quotation.
43″Display size
1920×1080FHD resolution
mini-LVDSSignal interface
0 to +50 °COperating temperature
Key Specifications
| Model | HV430FHB-F90 |
|---|---|
| Size | 43 inch class (42.5 inch active diagonal) |
| Resolution | 1920 x 1080 |
| Resolution Class | FHD (1080p) |
| Panel Type | a-Si TFT-LCD, ADS technology, transmission mode, normally black |
| Form | Open Cell |
| Active Area | 940.896 (H) x 529.254 (V) mm |
| Pixel Pitch | 163.35 (H) x 490.05 (V) µm |
| Pixel Arrangement | RGB vertical stripe |
| Interface | 2-port mini-LVDS, 51-pin input connector |
| Interface Colour Mapping | 8-bit LVDS (JEIDA / NS selectable) |
| Refresh Rate | 60 Hz typical (57 to 63 Hz) |
| Contrast Ratio | 1200:1 typical (800:1 minimum) |
| Viewing Angle | 89/89/89/89 (CR greater than 10) |
| Response Time | 8 ms typical (10 ms max, G to G) |
| Cell Transmittance | 6.3% typical (center point, reference backlight unit) |
| Surface Treatment | Haze 1%, 3H hard coating (front polarizer) |
| Supply Voltage | VDD 12.0 V typical (10.8 to 13.2 V) |
| Weight | 1510 g typical |
| Operating Temperature | 0 to +50 °C |
| Storage Temperature | -20 to +60 °C |
| Compliance | RoHS compliant (as recorded in the registered specification) |
The values on this page are taken from the currently registered specification for HV430FHB-F90; several are marked typical and are subject to revision verification against the latest datasheet before design-in, sampling or quotation. The registered document for this model is a preliminary revision (Rev.P0), so confirm the current revision with Vernon. Fields that are not listed here have not been confirmed for the revision currently on file.
Applications & Buyer Fit
HV430FHB-F90 is a 43 inch class FHD TFT-LCD open cell for buyers evaluating a large-format display panel with a 2-port mini-LVDS interface. The registered specification for this model records intended application directions including multimedia TFT-LCD TV, display terminals for control systems, and AV application products. Those notes come from the source specification and describe the panel’s intended use, not a confirmed fit for any particular project.
The fields used for first-stage screening on this page are size, resolution, resolution class, panel type and display mode, form, active area, pixel pitch and pixel arrangement, interface, refresh rate, contrast ratio, viewing angle, response time, cell transmittance, surface treatment, supply voltage, weight, operating and storage temperature.
Suitable for evaluation in display sourcing and integration projects where the exact mechanical, electrical and optical requirements are confirmed before design-in. Tell Vernon your application and the required mechanical, electrical and optical conditions, and the sourcing team can compare them with the current specification.
Interface & Integration Notes
The current specification records a 2-port mini-LVDS interface with a 51-pin input connector and 8-bit colour mapping for this model. For project evaluation, match the display with your mainboard interface, cable definition, timing controller, power requirements and mechanical mounting direction before confirming a sample or bulk order.
- Confirm the signal interface, the connector and the pin assignment against the selected control board or embedded mainboard.
- Check the active area and the mechanical outline against the enclosure design; an outline drawing is part of the registered specification and can be requested.
- Confirm cable, timing controller, power and any backlight unit requirement before design-in.
- Request the current specification and confirm the revision you intend to order.
Alternative Sourcing Options
No related model is published on this page for HV430FHB-F90, because a similar size class or resolution is not by itself confirmation of compatibility. Send the details below and Vernon will review sourcing options with you:
- Exact model and, where available, a label photo
- Current datasheet or specification
- Required size, resolution and interface
- Mechanical constraints and mounting direction
Frequently Asked Questions
Does this page show the latest revision of HV430FHB-F90?
The values on this page come from the currently registered specification for HV430FHB-F90, which is a preliminary revision (Rev.P0) on file with Vernon. Request the latest revision before design-in, sampling or quotation so the specification can be confirmed for your project.
Can I request the current specification for HV430FHB-F90?
Yes. Send your requirement through the inquiry form and Vernon can review your request for the current specification, connector definition, outline drawing and configuration details.
What information should I provide for technical evaluation?
Exact model, label photo, current datasheet, required size, resolution, interface, mechanical constraints and your target application. Those items let Vernon match your requirement against the registered specification and confirm what still needs to be verified.
How should compatibility be verified before design-in?
Electrical and mechanical fit must be checked against the current specification before any commitment. The interface name, connector, pin assignment, timing, power and mounting position each need to be confirmed against your board and enclosure; a similar size or resolution is not treated as confirmation of compatibility.
Can Vernon help evaluate HV430FHB-F90 for replacement or alternative sourcing?
Yes. Replacement and alternative-model suitability is assessed separately from this page. Share your existing model, label photo and current datasheet and Vernon will review the sourcing options with you.
Send Your HV430FHB-F90 Inquiry
Share your quantity, target application, destination market, and whether you need the current specification, sample or quotation. Vernon can review the current revision and the configuration details you require.
Send Inquiry
Please send your inquiry for HV430FHB-F90 using the form below. Our team can help confirm the current specification, revision status, sample requirements, and cable and power requirements.
