The Innolux M236HJJ-P02, BOE MV238FHB-N30 and BOE MV238FHM-N62 are three ~23.8-inch FHD LVDS panels that integrators cross-shop, but they split into two different product forms: the M236HJJ-P02 and MV238FHB-N30 are open cells (no backlight, 0 cd/m²) while the MV238FHM-N62 is a complete module with its own backlight at 250 cd/m². They also differ in panel technology — Super MVA at 3000:1 contrast versus ADS wide-view at 1000:1. This guide from Vernon Tech (Guangzhou Wanhong Electronic Technology Co., Ltd.) compares all three for monitor, AIO PC and display-integration projects.
Published: June 2026 · Last updated: 3 June 2026
What are the M236HJJ-P02, MV238FHB-N30 and MV238FHM-N62?
All three are Full HD (1920×1080) a-Si TFT-LCD panels with a 75 Hz refresh rate and a 30-pin LVDS (2-channel, 8-bit) interface on a 5.0 V supply, but they are not the same product form. The M236HJJ-P02 is a 23.6-inch Super MVA open cell from Innolux; the MV238FHB-N30 is a 23.8-inch ADS open cell from BOE (BOE Technology); the MV238FHM-N62 is a 23.8-inch ADS complete module, also from BOE.
The practical split is open cell versus module. An open cell ships without a backlight unit (its brightness is listed as 0 cd/m²), so the integrator adds a backlight, driver and bezel. A complete module like the MV238FHM-N62 arrives with a 20S4P WLED backlight rated for 30,000 hours and a 250 cd/m² output, ready to drive.
All three are indoor, LVDS panels without touch, rated for a 0 °C to +50 °C operating range. None is sunlight-readable, and the interface is LVDS rather than eDP.
Open cell vs module, and Super MVA vs ADS
Two decisions separate these panels: whether you want an open cell or a complete module, and whether you prioritise contrast (MVA) or viewing angle (ADS). Resolution, interface and refresh rate are otherwise the same.
Open cell vs complete module
The M236HJJ-P02 and MV238FHB-N30 are open cells — thin glass assemblies (1.32 mm on the BOE cell) with no backlight, so you supply the backlight unit and tune brightness yourself. The MV238FHM-N62 is a 13 mm complete module with an integrated 250 cd/m² backlight, which removes that step but weighs more (2.20 kg vs roughly 0.5 kg for a cell).
Super MVA vs ADS
The Innolux M236HJJ-P02 uses Super MVA for a 3000:1 contrast ratio and deep blacks, at 72% NTSC color. Both BOE panels use ADS (a wide-viewing-angle technology comparable to IPS) at 1000:1; the MV238FHM-N62 module further adds 100% sRGB color and a low-blue-light backlight for eye comfort.
M236HJJ-P02 vs MV238FHB-N30 vs MV238FHM-N62: full comparison
The table groups the panels by product form and panel technology. All figures are taken from the panel data, not estimated.
| Specification | M236HJJ-P02 | MV238FHB-N30 | MV238FHM-N62 |
|---|---|---|---|
| Brand | Innolux | BOE | BOE |
| Product form | Open cell | Open cell | Complete module |
| Panel size | 23.6 inch | 23.8 inch | 23.8 inch |
| Optical mode | Super MVA | ADS | ADS |
| Resolution | 1920×1080 FHD | 1920×1080 FHD | 1920×1080 FHD |
| Active area | 521.28×293.22 mm | 527.04×296.46 mm | 527.04×296.46 mm |
| Backlight | None (add your own) | None (add your own) | 20S4P WLED, 30K h |
| Brightness (typ) | 0 cd/m² (cell) | 0 cd/m² (cell) | 250 cd/m² |
| Contrast (typ) | 3000:1 | 1000:1 | 1000:1 |
| Viewing angle (typ) | 89/89/89/89 | 89/89/89/89 | 89/89/89/89 |
| Colors / gamut | 16.7M, 72% NTSC | 16.7M, 74% NTSC | 16.7M, 100% sRGB, low blue light |
| Response (typ) | 25 ms (G-to-G) | 14 ms (G-to-G) | 14 ms (G-to-G) |
| Surface | Matte (Haze 25%) + 3H | Matte + 3H | Matte (Haze 25%) + 3H |
| Refresh | 75 Hz | 75 Hz | 75 Hz |
| Interface | LVDS 2-ch, 8-bit, 30-pin | LVDS 2-ch, 8-bit, 30-pin | LVDS 2-ch, 8-bit, 30-pin |
| Supply voltage | 5.0 V | 5.0 V | 5.0 V |
| Outline depth | cell (thin) | 1.32 mm (cell) | 13 mm (module) |
| Weight (typ) | 512 g | 538 g | 2.20 kg |
| Touch | None | None | None |
| Operating / storage | 0–50 / -20–60 °C | 0–50 / -20–60 °C | 0–50 / -20–60 °C |
| Second-source | — | — | 5 compatible models listed |
Note: model code, product form (cell vs module) and interface should always be confirmed against the current data sheet before quotation. Tell Vernon Tech whether you need the open cell, a cell-plus-backlight build, or the complete module.
Which 23.8″ panel should you specify?
First decide whether you are integrating your own backlight (choose a cell) or want a drop-in module, then choose between MVA contrast and ADS viewing angle. The three options map cleanly to three project types.
Choose the Innolux M236HJJ-P02 (Super MVA open cell) for
Designs where you supply your own backlight and want the deepest contrast (3000:1) — high-contrast monitors and signage faces where blacks matter. It is a 23.6-inch cell, so its active area is slightly smaller than the 23.8-inch options.
Choose the BOE MV238FHB-N30 (ADS open cell) for
Backlight-integrated designs that need wide, consistent viewing angles rather than peak contrast — shared or public-facing monitors. It offers slightly wider color (74% NTSC) than the M236HJJ-P02 cell.
Choose the BOE MV238FHM-N62 (ADS complete module) for
Projects that want a ready-to-drive 23.8-inch module with the backlight included (250 cd/m²), the best color (100% sRGB) and a low-blue-light backlight for eye comfort — finished monitors and all-in-one PCs. It also lists five cross-compatible models, which helps second-source planning.
If you are matching an existing 23.6–23.8-inch design, send the original part number, and tell Vernon Tech whether you need a cell or a module, so fit and the LVDS pinout can be confirmed before sampling.
If none fits: related and upgraded solutions
If your project needs something other than a standard indoor 23.8″ LVDS panel, Vernon Tech can match an adjacent solution. The most common requests are touch, higher brightness and a different size.
Add touch
None of the three includes touch. For interactive monitors and AIO terminals, Vernon Tech can pair the panel with a PCAP touch sensor, controller and cover lens as a bonded touch kit.
Need more brightness or another size
For semi-outdoor or sunlit installations, 250 cd/m² is not enough — ask about high-brightness 300–700 nit modules. For other sizes, compare the 21.5-inch T215HVN05.1 vs HR215WU1-120 or the 15.6-inch NV156FHM eDP panels, or browse the full BOE, AUO and Innolux LCD module range.
OEM / ODM display assemblies
Vernon Tech supports OEM/ODM builds: cell plus backlight, or a complete module with LVDS cable, controller board, cover lens and housing delivered as a tested assembly. Follow display industry updates for panel availability and roadmap changes.
Get a quote on the M236HJJ-P02, MV238FHB-N30 or MV238FHM-N62
Vernon Tech (Guangzhou Wanhong Electronic Technology Co., Ltd.) is a Guangzhou-based B2B supplier of original BOE, AUO and Innolux display panels and open cells, serving monitor, AIO PC, kiosk and signage integrators worldwide with OEM/ODM service, USD pricing and CE / FCC / UKCA / SASO documentation by destination.
Send your application, target quantity and whether you need a cell or a module, and Vernon Tech will confirm the right option and reply with a USD quotation within 12 hours.
Request a USD quote & data sheet
- ✅ Factory-direct BOE, AUO & Innolux panels — OEM / ODM supported
- 💰 USD pricing & worldwide shipping
- ⏱️ Reply within 12 hours
- 📦 Open cell or complete module — samples & bulk
- 📝 CE / FCC / UKCA / SASO certificates by destination
Frequently asked questions
What is the difference between the M236HJJ-P02, MV238FHB-N30 and MV238FHM-N62?
The M236HJJ-P02 is an Innolux 23.6-inch Super MVA open cell at 3000:1 contrast. The MV238FHB-N30 is a BOE 23.8-inch ADS open cell at 1000:1. The MV238FHM-N62 is a BOE 23.8-inch ADS complete module with a 250 cd/m² backlight, 100% sRGB color and low blue light. All three are FHD, 75 Hz, LVDS.
Which of these are open cells and which is a complete module?
The M236HJJ-P02 and MV238FHB-N30 are open cells listed at 0 cd/m² because they have no backlight. The MV238FHM-N62 is a complete module with a 20S4P WLED backlight at 250 cd/m².
Do I need to add a backlight to these panels?
Yes for the two open cells (M236HJJ-P02 and MV238FHB-N30) — you supply the backlight, driver and bezel. No for the MV238FHM-N62, which ships with its backlight integrated. Vernon Tech can also build a cell into a complete assembly on request.
Which 23.8-inch panel has the best color?
The MV238FHM-N62 module, at 100% sRGB with a low-blue-light backlight. The two open cells cover 72–74% NTSC, suited to general UI rather than color-critical work.
Which one has the highest contrast?
The Innolux M236HJJ-P02 at 3000:1, thanks to its Super MVA panel. The two BOE ADS panels are 1000:1 but hold color better across wide viewing angles.
Do these panels use eDP, or do I need an LVDS board?
All three use LVDS (2-channel, 8-bit, 30-pin) on a 5.0 V supply, not eDP. Confirm your controller or mainboard outputs LVDS before specifying any of them.
What lead time and MOQ can I expect?
MOQ and lead time depend on quantity and supply form (open cell, cell-plus-backlight, or complete module). Vernon Tech replies within 12 hours with a confirmed USD quotation, and supports both sample orders and bulk production.
